286C HI-TEMP GREASE WITH COPPER

 

Hi-Temp Grease with Copper is a high temperature synthetic silica gel thickened anti-wear, extreme pressure grease that is specially formulated for those industrial bearing applications, where extremely high temperature up to 650°C are encountered. Hi-Temp Grease With Copper is compounded from a blend of polyethylene glycol synthetic base fluids and a silica gel based thickener system.

 

Further blended into these polyethylene glycol synthetic base fluids and the silica based thickener system is a proprietary high temperature anti-wear extreme pressure additive and a combination of molybdenum disulfide, graphite and copper flake. As high temperatures occur the Hi-Temp Grease With Copper will gradually soften in consistency without any drippage of the synthetic base fluids, in order to carry and spread the molybdenum disulfide, graphite and copper flake into the bearing clearances and onto the bearings surfaces. As the temperatures continues to become elevated the synthetic base fluids begin to volatilize cleanly without leaving any residues, varnishes, gums or carbon deposits on the bearing surfaces. Once the synthetic base fluids have volatilized off a solid lubricant film consisting of the high temperature anti-wear extreme pressure additive and the combination of molybdenum disulfide, graphite and copper flake is left behind to lubricate at temperatures up to 650°C

 

Note: Grease must reach 315°C or higher consistently before it will lubricate effectively.